Connecticut Tank Lining

Why do Connecticut businesses choose American Coating Technologies every time they need their fuel tanks blasted and coated? We've eliminated sandblasting and the cleaning up of blast media, and provides the longest-lasting finish available today.

Our process is 4 times faster than the conventional kind that gets rolled on, lasts 3 times longer, better resists mold growth, and you can tell the difference just by looking at the finished product. Keep reading to learn more about our proven tank coating process.

The Initial Tank Lining Inspection

Less time and better products mean less cost to our clients in the long run. To get a better idea of what your fuel tank requires in terms of lining, we come to visit you for an in-person tank lining inspection. This service is 100% FREE and is extended to everyone, regardless of whether you are already an American Coating Technologies customer or not.

We use the American Petroleum Institute Standard 652 for the lining of above-ground petroleum storage tanks. So, we start each service with a full inspection to see if any repairs are necessary to bring the tank up to API 652 standard.

It's then that we also choose the best blast cleaning system for surface preparation for your tank. And as always, our advice is 100% free. You can take and use it, even if you don't end up using American Coating Technologies for your fuel tank lining.

Our Proven Tank Coating Process for Connecticut Tanks

• Step 1: The tank is water blasted with 3,500 pressure units. This removes all loose coating and dirt.
• Step 2: A surface tolerant dry-fall primer is applied about 4-7 millimeters thick. This layer protects the tank against corrosion over time.

All of the products used by American Coating Technologies are dry-fall, solvent-borne coatings. We apply every material in the tank coating process without over spray. Plus, our products don't get chalky or lose their protective properties over time.

Our topcoat is an aliphatic urethane with a mold inhibitor, which creates the kind of UV and chemical protection that you typically only see on a car.

Once again, our initial inspection is FREE. If you're seeking the best tank lining service for your Connecticut business, contact us today!